← All posts

Windows

How to Remove Window Screens (Every Common Type)

How to remove window screens: tension springs, pull tabs, plunger pins, sliders and casements, and how to put them back without bending the frame.

Look at the edges of the screen frame before you pull on anything. A screen is held by springs, tabs or pins, and once you know which, it comes out in a few seconds. Most screens on double-hung and sliding windows come out from inside the house.

Tension springs

Small metal springs sit in one edge of the frame, usually the top or one side.

  1. Push the screen firmly toward the spring side. The springs compress and the opposite edge comes loose from its channel.
  2. Tilt the loose edge toward you.
  3. Pull the screen out of the spring channel.

Pull tabs

Two plastic or fabric tabs stick out from the bottom or side of the frame.

  1. Pull both tabs toward you while pushing the screen up into the top channel.
  2. Swing the bottom edge out.
  3. Drop the screen down out of the top channel.

Plunger pins

Small spring-loaded pins poke out from the sides of the frame into holes in the window track.

  1. Pinch each pin inward with your fingers until it clears its hole.
  2. Pull that side of the screen toward you, then free the other side.

Sliding windows

Lift the screen straight up into the top track, swing the bottom out, and lower it out of the top.

Casement windows

Casement screens sit on the inside of the window. Turn the small clips or latches around the frame and pull the screen into the room.

Screens with no tabs

Use a putty knife or a flat screwdriver in the gap at the bottom of the frame. Lever a little at a time and move along the edge. Prying hard in one spot bends an aluminum frame, and a bent frame never sits flush again.

Before you take them all out

  • Label each screen. A strip of painter’s tape with the room and side (“kitchen left”) saves a lot of trial and error later. Screens on the same wall often look identical and differ by a few millimeters.
  • Store them flat or standing on edge. Leaning a stack against a wall bows the frames.
  • Don’t reach out of a second-story window to wrestle with an outside-mounted screen. If a screen only comes off from the outside and you can’t reach it from the ground, leave it.

Cleaning them while they’re out

Screens hold a surprising amount of pine pollen and dust, which washes onto the clean glass the first time it rains. Our guide to cleaning window screens covers the quick version with a hose and dish soap.

When we clean windows, screens come out, get cleaned and go back in as part of the job, along with the sills. If you’d rather hand the whole thing off, our window cleaning service starts at nine dollars a pane.

Quick answers

How do you remove a window screen from the inside?
Find what holds it: springs on one edge, pull tabs, or small pins on the sides. Push the screen toward the springs, pull the tabs, or retract the pins, then tilt the free edge into the room and lift the screen out of the opposite channel.
How do you remove a window screen with no pull tabs?
Slide a putty knife or flat screwdriver into the gap at the bottom edge of the frame and lever it out a little at a time, working along the edge so the frame doesn't bend. Lift the screen up into the top channel as you do it, then swing the bottom out.
How do you put a window screen back in?
Reverse the steps. Seat the edge with the springs or the top edge into its channel first, compress it, then swing the other edge in until it clicks or sits flush. If it fights you, the screen is probably upside down or belongs to a different window.

Get a straight number for your house.

Tell us your address and what needs doing. A real person reads every request, and there is no obligation.

  • Windows inside and out, cleaned by hand
  • From nine dollars a pane, quoted up front
  • The same family crew, every visit
  • No obligation, ever
Home stories
What needs cleaning?

A real person reads every quote request.

Call Get a free quote