← All posts

Fixtures

How to Clean Light Fixtures and Glass Shades

How to clean light fixtures: switch the power off, take the glass shade down, wash it in warm soapy water, empty the dead bugs, and dry before you put it back.

Turn the power off, lift the glass shade down, wash it in warm soapy water, dry it completely, and wipe the base with a damp cloth. The bowl of a ceiling fixture is where the dead bugs collect, and it only takes a few minutes to empty.

What you need

  • A stepladder
  • Warm water with a few drops of dish soap
  • Two soft cloths, one damp and one dry
  • A towel or sink with a folded cloth in the bottom
  • A bag for the bugs

Steps

  1. Switch the light off at the wall and let any bulbs cool. For hardwired fixtures, turn the breaker off before you touch the socket.
  2. Remove the shade or cover. Most unscrew or release with a small thumbscrew or twist. Hold it steady with one hand while you free it.
  3. Tip out the dust and dead bugs into the bag.
  4. Wash the shade in warm soapy water. Rinse and dry it with a soft cloth to avoid water spots.
  5. Wipe the fixture base and the bulb with a damp cloth. Keep water away from the socket.
  6. Reinstall the shade once everything is dry. Tighten by hand.

Notes

Don’t use abrasive pads on glass or brass finishes. If the shade is old, fluted or hand-painted, wash it by hand rather than in a dishwasher. If you can’t reach a fixture safely from a stepladder, skip it.

Hard-to-reach fixtures

Fixtures over a stairwell or a vaulted ceiling are better left to someone with the ladder and the reach. We clean light fixtures, ceiling fans and chandeliers, and replace burnt-out bulbs and smoke alarm batteries, in Evergreen, Conifer, Bailey, Golden and the south Denver metro. See the chandelier steps for crystal. Ask for a free quote.

Quick answers

How do you clean a ceiling light fixture?
Turn the power off, remove the glass shade or cover, wash it in warm soapy water, dry it fully, and wipe the base with a damp cloth. Put it back only when it's dry.
How do you clean a flush-mount light full of dead bugs?
Take the cover down, tip the bugs out into a bag, and wash the cover in warm soapy water. Dry it before reinstalling.
Can you use glass cleaner on light fixtures?
On the outside of a glass shade, yes. Spray the cloth, not the fixture, so liquid doesn't run into the socket.

Get a straight number for your house.

Tell us your address and what needs doing. A real person reads every request, and there is no obligation.

  • Windows inside and out, cleaned by hand
  • From nine dollars a pane, quoted up front
  • The same family crew, every visit
  • No obligation, ever
Home stories
What needs cleaning?

A real person reads every quote request.

Call Get a free quote